Wheels

- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 146mm - 1 axle per bag

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - 22mm metal dust seal is pressed on cone - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 11.4mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Nexave HB-T400 Front - Shimano Deore HB-M510 Front - STX HB-MC32/30 Front - STX Parallax Front

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Heavy duty and extra wide PVC rim strips for maximum tube protection.

Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Front Wheel - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27" - ISO Diameter: 630 / 27" - Tire Type: Clincher

Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher

The Rear Wheel Cover is a critical safety component for carrying passengers on the Globe Haul ST. The easy-to-install guards cover openings on the frame and rear rack to prevent fingers, toes, and clothes from getting too close to the moving wheel and chain. They also protect from dust and grease to keep riders and bikes cleaner. **For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. ** - Compatible with Haul ST. - Includes two upper fender covers and two lower wheel covers. - Easy toolless installation.

• Titanium axles with alloy hardware • Steel cam mechanism for longevity, and self-lubricating brass bushings

The new Stout XC SL 29 rear wheel features 141mm hub spacing and a 9mm QR axle for increased wheel stiffness and improved riding performance. It includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. QR Boost 141x9mm spacing. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.

Shimano's 105 Front Hub is an excellent beginning to a strong, light front wheel. The diamond-polished bearing races mean the hub rolls super smoothly and the labyrinth seals shut out dust, dirt and water. Plus, the cold-forged-aluminum hub shell is beautiful and built to last. You get Shimano's excellent quick-release skewer, too.

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams

- SRAM, MTH 406, Freehub Body, 11.2015.018.100

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's X7 hubs will leave a smile on your face. An aluminum hubshell with machined flange grant the hubs a low weight without compromising durability. Tough cartridge bearings roll smooth for the long haul and strong steel axles hold up under pressure, just like you.

When we set out to create a lightweight tubular disc wheel, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest disc wheelset available with the aerodynamic attributes of something twice its depth. It was a tall order, but in the end, our CLX 32 Tubular Disc not only not only delivers on this in spades, but it also provides incredible brake modulation and power in all conditions, increased impact resistance, and a disc-specific carbon layup that increases strength while decreasing weight. Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category. For this CLX 32, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes to create the best overall system. This results in a 550-gram, front wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents. Each front wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag, Roval steel quick-release, 12mm thru-axle, quick-release end caps - Front Hub: Roval AFD1, Center Lock, CeramicSpeed bearings, quick-release or 12mm thru-axle end cap - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 32mm - Rim Material: Carbon - Rim Type: Carbon tubular - Rim Width: 27.1mm external - Spoke Count: 21 - Spoke Pattern: Two-cross/Radial (2:1) - Spoke Type: DT Swiss Aerolite (L)/Aerocomp (R) T-head - Weight: 550g

The Roval CLX 32 Disc full-carbon clincher is the perfect performance disc wheel; light, stiff, and fast. The wide internal rim width provides an optimum tire profile for precise handling, stiffness, and aerodynamics. The Center Lock hub makes this an ideal wheel for the muddiest cross-race or fast paced ride. This wheel offers a non-SCS rear hub for traditional QR or 12mm thru-axle compatibility.

Performance Upgrade Made Easy The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much. Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.

The Roval SLX 24 Disc is a no nonsense wheelset. At only around 1515 grams, it's designed for light overall weight, but this doesn't mean that it sacrifices anything to strength or durability. Instead, its 20mm-wide alloy rims work to bolster the aforementioned characteristics, while also providing the optimal tire profile in order to enhance both confidence and feel on the road. Meanwhile, the rims have been built to Roval aero hubs that feature fast-engaging DT 350 star-ratchet internals at the rear. Add it all up, and you get a wheelset that checks all of the boxes for daily training and CX racing—lightweight, stiff, and incredibly reliable.

Following directly in the tire tracks of the Terra CLX, the new Terra CL utilizes the same super-light, incredibly tough rim as our flagship wheel. It's a hook-bead, 33mm deep carbon fiber rim with a 25mm inner width that plays well with tubeless setup and allows you to mount tires anywhere from 28mm to 47mm wide at whatever pressure you feel like running. In a nod to accessibility, durability and real-world serviceability, we opted to use ultra-dependable DT Swiss 350 hubs and lace them to the rims with DT Swiss Competition Straightpull spokes. The net effect of these changes is a wheelset that is almost as light as our incredibly light Terra CLX, offering close to the same benchmark performance but with more easily sourced spokes in the event of some back-of-beyond carnage, all with a price tag that is about half that of our flagship product. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 350 Straight-pull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Two-cross (1:1) 24 count, R: 287mm, L: 286mm; Rear: Two-cross (1:1) 24 count, DS: 284mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,408g, Front 654g, Rear 754g (including tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types. - Easily snaps over your rims - Stretchy, tightly woven material provides a close fit and protects from abrasion - Sold as a pair - Not for tubeless set up

The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork. Kit includes Center Lock Adaptor, allowing riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - 10mm spacer kit adapts 100 x 15mm front hub to 110 x 15mm - Includes 10mm adapter to 6-bolt rotors - Includes external spline lock ring for thru-axle compatibility

Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork. Kit includes Center Lock Adaptor, allowing riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - 6mm spacer kit adapts 142 x 12mm rear hub to 148 x 12mm - Includes 6mm adapter to 6-bolt rotors - Includes external spline lock ring for thru-axle compatibility

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types

Ardennes RA Pro (Rim Brake). The original all-road performance wheel. With rolling hills, dense forests, and cobbled climbs the Ardennes region of Belgium is cycling holy ground, a setting that has tested the mettle of the sport’s greatest riders for a century. Mettle meets metal in the HED Ardennes RA Pro, our go-anywhere, do-anything alloy wheel set that was crushing gravel a decade before the competition. FEATURES: Built in the U.S.A. 1,555g per Wheelset 21mm Internal Width, 25mm External Width The Original All-Road Bike Wheel. There’s little question why the Ardennes is one of HED Cycling’s most popular products. For over a 15 years, HED’s Ardennes wheels have been the go-to for pro and amateur cyclists looking for a supreme ride quality in their everyday wheelset. With a 21mm internal width, the HED Ardennes RA Pro wheels accommodate a wide range of tire options, from 25mm road tires to all-road and gravel tire options spanning well past 40mm. These wheels are also tubeless compatible, providing versatility that, combined with the strength and comfort of best-in-class aluminum wheel design, means that no road is off-limits. Ardennes RA Pro wheels are designed to suit your demands, wherever you want to roll next. Complete with Sapim spokes and HED’s professional grade Sonic 500 hubs, you may want to book a trip to Belgium. The cobbles are calling. Front: - Wheel Weight: 675g - Hub: HED HU216 - Bearing Type: 6900 2rs Radial - Spokes: Sapim Race - Spoke Type: Straight Pull - Spoke Length: 286mm - Spoke Cross: Radial Rear: - Wheel Weight: 880g - Hub: HED Sonic 545 - Bearing Type: 6902 2rs Radial - Spokes: Sapim Race - Spoke Type: J Bend - Spoke Length: 284mm / 288mm - Spoke Cross: 2x

Whether your jam is to unravel the gravel as fast as possible, or just travel gravel - the Emporia GC3 Performance has the gravel taming technology of HED’s Emporia GC3 Pro at a more accessible price point. We make our carbon rims here, from lay up into our made-in-house molds, to curing and finishing. Unlike many competitors, we don’t paint our rims to mask imperfections. What you see is exactly what you get. And what you get is excellence. Light and durable hand made rims and hand built wheels. A 26mm internal width to shape your tires for optimal grip and comfort. Whatever you have in mind, the Emporia GC3 Performance wheels are ready to take you there with speed and confidence. FEATURES: Handmade in the U.S.A. Carbon Rims 1,545g per Wheel Set 26mm Internal Rim Width 31mm External Rim Width Tubeless EMPORIA GC3 PERFORMANCE SPECIFICATIONS: Rim Type: Carbon/Hookless Front Wheel Weight: 700g Rear Wheel Weight: 845g Freehub Type: HED 4-pawl Bearing Type: 6902 Stainless Spokes: Sapim Race DB Spoke Type: Hooked Spoke Lacing: Two Cross Minimum Tire Size: 32mm

HED’s Fastest Wheel. Ever. For HED, that’s saying something, since we have been making world championship winning wheels for more than 35 years. It all begins with our patented rim profiles. Raw carbon is laid up into molds (also manufactured in house), cured, and finished. Each rim is completely handmade by our team here in Minnesota. Boasting drag numbers that can drop to negative 100g, the Vanquish RC Pro series wheels are simply faster than the competition. Blink and you just might miss them. Freehub Note: *Campagnolo requires a longer lockring to safely secure 10/11/12 speed cassettes to N3W freehubs. Cassette dimensions vary, not all Campy cassettes will work with the N3W body on Hed hubs. FEATURES: Handmade in the U.S.A. Rim depths ranging from 40mm to a complete Aero Disc Wheel set weights starting at 1,455g with the Vanquish RC4 Pro HED Sonic Pro Centerlock Disc Brake Hubs Tubeless Compatible The Vanquish RC Pro Series is our full carbon, disc brake masterpiece. Our patented shapes make the series the most aerodynamic bike wheels in the world. At HED, compromise is never an option. Period. Each depth in the Vanquish series is optimized for aerodynamics first, with handling a very close second consideration. Going fast is about drag reduction AND predictability. Choose Vanquish 4 if you are a very light rider, commonly ride in the mountains, or are a weight weenie. Vanquish 6 is our most popular option, great for road racing and occasional time trials. Vanquish 8 and Vanquish disc (RCD Pro) are unbeatable for pure TT speed. Each Vanquish RC Pro rim is made by hand in the U.S.A., right here in Minnesota, and each one goes through multiple layers of quality control. Between this level of craftsmanship and the unprecedented aerodynamic performance of the Vanquish rim profile, the result is truly something special. There’s a spirit to these wheels: a superb, searingly fast ride quality; a true embodiment of HED’s philosophy of Proven Speed.

HED Vanquish RC6 Performance Carbon Front Designed by the same minds and made by the same hands that are responsible for the Vanquish RC Pro wheel series, the Performance version of HED's Vanquish wheels are primed and ready to race. The hooked 21mm (internal) rim bed is tubeless-ready. HED's GP disc brake hubs and Sapim's Sprint spokes control the wheel's cost but not their speed. Like the original Vanquish, the Performance charts not just very low drag, but also very similar drag numbers with tires ranging from 23-28mm tires. Ditch tire width anxiety and ride fast on any road surface! Like our other wheels, the all-carbon Vanquish RC Performance Rim is manufactured from start to finish in the USA. The shape is all-new, with a huge 30mm to 30.6mm external width (21mm internal width). This results in superb aerodynamic performance with 23-28mm tires. If gravel and endurance riding are your thing, the Vanquish will optimize the shape, ride quality, and even aerodynamics of your wide gravel and cyclocross tires. Please note that the Vanquish is available in a disc brake model ONLY. Why, you ask? Two reasons: 1) Carbon rims do not cool as efficiently as alloy rims. The extreme heating and cooling cycles of an all-carbon rim brake clincher rim compromises the structural integrity of the inner tube and can cause a tire casing to soften or even melt – a clear safety risk. 2) Removing the rim brake from the equation allowed us to make a new rim profile that simply wouldn't fit inside of a rim brake. It's a true disc-brake-specific rim, unencumbered by rim brake constraints. Features: - 60mm rim depth - Shimano 10/11 or Sram XDR - Disc brake only - Recommended tire width 23mm-28mm - Tube and tubeless compatible - HED GP centerlock disc brake hubs - Tubeless rim tape and tubeless valves included - Stock with either 12mm or 15mm thru-axles front and 12mm rear

HED Vanquish RC6 Performance Carbon Rear Wheel Designed by the same minds and made by the same hands that are responsible for the Vanquish RC Pro wheel series, the Performance version of HED's Vanquish wheels are primed and ready to race. The hooked 21mm (internal) rim bed is tubeless-ready. HED's GP disc brake hubs and Sapim's Sprint spokes control the wheel's cost but not their speed. Like the original Vanquish, the Performance charts not just very low drag, but also very similar drag numbers with tires ranging from 23-28mm tires. Ditch tire width anxiety and ride fast on any road surface! Like our other wheels, the all-carbon Vanquish RC Performance Rim is manufactured from start to finish in the USA. The shape is all-new, with a huge 30mm to 30.6mm external width (21mm internal width). This results in superb aerodynamic performance with 23-28mm tires. If gravel and endurance riding are your thing, the Vanquish will optimize the shape, ride quality, and even aerodynamics of your wide gravel and cyclocross tires. Please note that the Vanquish is available in a disc brake model ONLY. Why, you ask? Two reasons: 1) Carbon rims do not cool as efficiently as alloy rims. The extreme heating and cooling cycles of an all-carbon rim brake clincher rim compromises the structural integrity of the inner tube and can cause a tire casing to soften or even melt – a clear safety risk. 2) Removing the rim brake from the equation allowed us to make a new rim profile that simply wouldn't fit inside of a rim brake. It's a true disc-brake-specific rim, unencumbered by rim brake constraints. Features: - 60mm rim depth - Shimano 10/11 or Sram XDR - Disc brake only - Recommended tire width 23mm-28mm - Tube and tubeless compatible - HED GP centerlock disc brake hubs - Tubeless rim tape and tubeless valves included - Stock with either 12mm or 15mm thru-axles front and 12mm rear

FSA's NS Wheelset is a tremendous value in an alloy MTB, cyclocross, and gravel bike wheelset with renowned FSA reliability and high performance technology. Suitable for use on a wide range of price point bikes. - Asymmetric, 25mm deep x 26.1mm wide alloy rim - Tubeless compatible - Cartridge bearings (2F+4R) - 2-cross double butted spokes with brass nipples - Artisan built, entirely by hand - Includes tubeless valves (1 pair) and spoke protector - Compatible with cyclocross and gravel bikes

Protect your tubes without adding bulk with these Rim Strips from FSA. They're lightweight, and come in different lengths according to wheel size. Peace-of-mind comes standard.

Grade 10 chromium steel balls

The Enve 5.6 have been specifically designed for road cyclists who want speed on flat and slightly undulating terrain. These wheels offer serious aerodynamic gains and are better suited to riders with performance in mind. Road racers and serious riders will certainly appreciate 5.6 wheels. The 5.6 have different profiles, the front wheel has a 54mm profile while the rear wheel has a 63mm profile. They were designed this way to increase the aerodynamic performance. The fact that the front rim is less contoured than the rear rim allows the rider not to be limited by side winds. The deep profiles reduce wind drag ensuring energy savings and giving you free speed. In terms of braking, SES 5.6 uses Enve's most recent textured brake track which offers very impressive braking performance in all condition, especially for rim brakes on carbon rims. All in all, this is a wheelset you choose because performance and speed are main goals. Details Front Axle - 100 x 12mm Rear Axle - 142 x 12mm Rim Material - Carbon Brake Compatibility - Center Lock Disc Rim Depth - Front: 54mm; Rear: 63mm Inner Rim Width - 19mm Outer Rim Width - Front: 28.75mm; Rear: 28mm Hub - ENVE Alloy CL Spokes - Sapim CX-Ray Spoke Count - 24/24 Lacing - 2X

What It Is The G23 is the definition of a true gravel wheelset. At 330 grams, ENVE's lightest 700c tubeless rim accelerates quickly and ascends with ease. Armed against pinch flats with the patent-pending Wide Hookless Bead, the G23 is tough and relentless on road, path, or trail. The G23 is a 700c tubeless carbon clincher wheelset with a generous 23mm internal width, specifically conceived to meet the performance and ride quality demands of serious mixed-surface cyclists. Who It's For Created for those seeking to discover new experiences, new terrain, and new challenges. Built to reflect the versatility of today's gravel and mixed surface riders, these wheels will excite ambitious, daring, and indomitable riders everywhere. If your path leads to classics like Dirty Kanza, Landrun, Crusher in the Tushar, or a new wave of events like Grinduro or Lost and Found, the G23 is your wheel. Why We Made It There is a place between road and mountain that is open to discovery. Beyond the range of your trail bike or the capabilities of your road bike. Terrain littered with contradicting challenges and demanding requirements are at odds with the bikes and products available today. We built the new G23 to thrive in this new environment, because insights gained through building the world's best road and mountain bike rims told us that the perfect combination did not exist in our stable, or in our opinion, anywhere at all. The higher volume and lower pressures would demand MTB toughness and flat resistance, while big days and long miles would require the lightweight and efficiency of a road machine. Above all, the combination of rough and rigid would require a wheel with the ride quality to make those long miles enjoyable and multi-day treks possible.

What It Is The SES 3.4 AR is the embodiment of the modern disc brake-only road wheelset. Aerodynamically optimized for high-volume tires (28 - 32mm), lightweight for long days in the mountains, high volume for all roads, and arguably the most versatile wheelset ENVE has ever made. Science & Insight In 2016 we launched the SES 4.5 AR, a wheelset ahead of its time. Since then, road riders, frame manufacturers, and tire makers have all caught the high-volume vision which has propelled the one-of-its-kind 4.5 AR to be our most popular wheel in North America where the high-volume all-road movement has gained the most traction. As more bikes are created that can accommodate tire clearances up to 32mm, we saw the need to create a more versatile, climber-friendly SES AR wheelset, and the SES 3.4 AR was born. Points of Differentiation - Real-world aerodynamics, optimized around 28mm to 32mm tubeless tires - Wide, Hookless Bead Anti-Pinch Flat Technology - Disc brake-specific materials and construction - Low weight leader in category - Tubeless-only design

The wheel that first merged aero with high volume tires, designed to make you faster on all road surfaces. Proven on the cobbles of Paris-Roubaix. - Intended Use: Road, All-Road - Inner rim width: 25mm - Aero Optimized Tire Size: 27 – 32c - Tubeless-only AERO FOR ALL ROADS The SES 4.5 AR is an uncompromising aero wheel designed specifically for disc brake equipped bikes and large volume 27 to 30mm tubeless road tires. Rebellious, unconventional, and pioneering are words that describe the one of its kind SES 4.5 AR. Conceptualized for the cobbles of Paris-Roubaix through our partnership with Team Dimension Data, the SES 4.5 AR was developed to deliver top shelf aero performance, stability, and comfort for virtually any road surface. The SES 4.5 AR is available as a tubeless clincher and tubular model rim. The SES 4.5 AR borrows from ENVE M Series carbon mountain wheel tubeless technology and features hookless beads. Hookless beads improve aerodynamic performance by aiding airflow from tire to rim as well as allow for the best tubeless tire performance possible. Like all Smart ENVE System aero wheels, the front and rear rims are specifically designed for the airflow seen at the front and back of the bike. As such, the front rim is more shallow and wider to maximize stability and the rear is deeper and narrower to aid in drag reduction. In addition to dissimilar geometries, the SES 4.5 AR features a disc brake specific construction that saves weight, improves strength, and creates an unprecedented ride quality.

Your Foundation for Adventure The ENVE AG 25 700c Wheelset is designed to be your uncompromising companion when you unwittingly—or intentionally!—bite off more than you can chew. The ENVE Foundation AG series of wheels will withstand the harshest terrain and support you when the going gets rough. Given the importance of comfort and compliance when riding unsuspended on rough surfaces, ENVE set out to better understand the correlation between comfort and various rim constructions. What resulted was a progression of more than a dozen unique rim laminates to balance the compliance, weight and responsiveness. Ride Tuned to Reward Your Hardest Efforts Decided to descend that MTB trail on your gravel rig but feeling a bit anxious? ENVE's Foundation AG wheels have your back. They are designed and tested using ENVE's proven M series impact testing protocol. The result is a wheel that inspires confidence when you need it the most. Features: - The AG25 features an inner rim width of 25mm and fits a minimum of 32mm wide tires - A shallow rim depth allows improved vertical compliance and vibration dampening - Rim cross-section and laminate are optimized for responsive power transmission and cornering stability - Serviceable external spoke nipples - Wide hookless bead technology for optimal tire/rim interface (to be used with approved tires only) - Lifetime incident protection and 5 year warranty

- Bladed Competition spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 190g (32/265mm) - Box of 20 - Nipples sold separately

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

Champion 2.0 Black Spokes - One 264mm spoke = 7g

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening